Design Inspiration Supplies

Design Instructions

satsumasurprise-1024px.jpg

 

 Supplies needed

  • 8    Botanical Beads    (94-5828-27)
  • 6    Plain Chaton Drops, SS39    (94-6837-03)
  • 18    Size 8 Seed Beads    (93-0447-27) 
  • 4    Round Jump Ring 20ga 4mm    (01-0024-27)
  • 40    4mm Crystal 5328 Bicone Beads, Tangerine
  • 9    6mm Crystal 5328 Bicone Beads, Tangerine
  • 3    SS39 Crystal 1088 Chaton, Tangerine
  • 3    SS39 Crystal 1088 Chaton, Peach Delite
  • 2 1/2 Rings of bracelet memory wire - Beadalon
  • Alcohol wipes
  • Two Part Epoxy Glue

Tools

  • Memory wire cutters
  • Round nose pliers
  • Chain and/or flat nose pliers (2)

Skill Level: Beginner

Designer:

Watch our technique videos on the TierraCast Blog (look for Jump Rings).

 

Steps

  1. Using alcohol wipes clean all the findings and set aside to dry.
  2. Using one jump ring attach to one 1088 ss39 chaton setting. Repeat five more times and set aside
  3. Using one 1088 ss39 chaton stone glue into one ss39 chaton setting and set aside for 24 hours to dry. Repeat five more times and set aside
  4. Using memory wire make a double loop at one end.
  5. Begin sliding on two 4mm bicone beads, one 6mm bicone bead, two 4mm bicone beads, one Botanical bead, one 4mm bicone bead one chaton setting with Tangerine chaton, one Botanical bead, two 4mm bicone beads, one 6mm bicone bead, two 4mm bicone beads, three metal seed beads, two 4mm bicone beads, one 6mm bicone bead, two 4mm bicone beads, one Botanical bead, one 4mm bicone bead, one chaton setting with Tangerine chaton, one Botanical bead, two 4mm bicone beads, one 6mm bicone bead, two 4mm bicone beads, three metal seed beads, one chaton setting with Peach Delite chaton, three metal seed beads, two 4mm bicone beads, one 6mm bicone bead, two 4mm bicone beads, one Botanical bead, one 4mm bicone bead, one Botanical bead, two 4mm bicone beads, one 6mm bicone bead, two 4mm bicone beads, three metal seed beads, one chaton setting with Peach Delite chaton, three metal seed beads, two 4mm bicone beads, one 6mm bicone bead, two 4mm bicone beads, one Botanical bead, one 4mm bicone bead, one Botanical bead, two 4mm bicone beads, one 6mm bicone bead, two 4mm bicone beads, three metal seed beads, two 4mm bicone beads, one 6mm bicone bead, and two 4mm bicone beads. Trim the end of the wire and make a double loop at the end.
  6. Add one chaton setting at each end of the bracelet.

Download the Satsuma Surprise Bracelet PDF