Design Inspiration Supplies
Design Instructions
Supplies needed
- 2 Hammertone Rings (94-3095-18)
- 2 12mm Plain Rivoli Frame (94-2311-18)
- 2 Beaded 3-1 Link (94-3055-18)
- 2 French Hook Ear Wire w/ 2mm Bright Copper Bead, 14/20 Rose Gold Filled (90-7120-10)
- 4 Small Blossom Charm (94-2547-18)
- 4 4mm Round Jump Ring (01-0024-18)
- 6 Eye Pin, 21g 2" (01-0027-08)
- 2 European Crystal 1122 12mm Rivoli Stone, Light Peach
- 12 European Crystal 5328 5mm Bicone Bead, Light Peach
- 2 European Crystal 5328 6mm Bicone Bead, Light Peach
- Alcohol Wipes
- Two Part Epoxy Glue
Tools
- wire cutters
- round nose pliers
- chain and/or flat nose pliers (2)
Skill Level: Beginner
Finished Size: Approx. 3”
Designer:
Watch our technique videos on the TierraCast Blog (look for simple loops and jump rings).
Notes: The image shows 14mm rivoli frames which have been retired. We've modified the instructions to use 12mm frames and stones.
Steps
-
Using alcohol wipes clean all the findings and set aside to dry.
-
Using one 1122 Rivoli 12mm glue into matching setting and set aside for 24 hours to dry. Repeat one more time and set aside.
-
Using one eye pin attach one Small Blossom Charm at the end and slide on two 5mm 5328 bicone beads and make a simple loop. Repeat three more times and set aside.
-
Using one eye pin slide on one 5mm 5328 bicone bead, one 6mm 5328 bicone bead and one 5mm 5328 bicone bead and make a simple loop. Repeat one more time and set aside.
-
Using one jump ring attach one Rivoli drop to the inside of one Hammered Ring. Using that same jump ring attach one more jump ring and then attach one component made in Step 4. Using the other end of component attach to the center loop in the Beaded Link.
- Using two components made in Step 3 attach them to the first and third loops in the Beaded Link. Attach ear wire at the top of the beaded link.
-
Repeat Steps 5 – 6 to make second earring.